Attempting to read poorly translated English is rather complicated with the installation manual for the Blitz Front Mount Intercooler.  I feel there is a need to better explain how to do it.  Although I had some complication and confusion, I was able to figure the setup out.  I want to pass that knowledge on to others as many of you have done for me.

*Remember to reinstall Under Tray after setup (cutting is required for correct fitting)*

To do this you might as well:

• Flush radiator coolant system

• Flush power steering system

 

Optional upgrades recommended to do at this time:

• Upgrade IC piping

• Upgrade radiator

• Remove AC

• Relocate battery to storage container behind seat.

• Air filter upgrade

• Y-pipe upgrade

 

Things that are modified in setup:

1. Power steering lines

2. Radiator positioning

3. Radiator mounting brackets.

4. Battery position

5. Fuse box

6. Air conditioning condenser position

7. The stock mount intercooler is removed

8. Radiator hose lengths

Part number in booklet and part's function:

114. Mounting bracket for fuse box and top brace for IC

115. Driver side IC brace to body frame

116. Passenger side IC brace to body frame

117. AST relocation bracket to IC piping 

118. Radiator stabilizer to IC

119. AC Condenser part

120. AC Condenser part

121. AC Condenser part

122. AC Condenser part

123. Passenger side bottom bracket for Radiator

124. Driver's side bottom bracket for radiator

125. not used

126. battery brace

127. radiator mounting brace on driver side

This page is under construction and until it is done, this information may not be entirely correct or complete.

	Blitz FMIC part numbers and locations

This site is meant to give information related to the 1993 (o)Mazda RX-7 Twin Turbo.  Anything from rotary engines to wiring diagrams and turbo upgrades to tuning info, this site has it all! efini 93 rx7 13b anfini Turbo RX-7 Turbo RX7 turbo rx7 rx7tt rx-7tt  As well as the Rotary Engine Pickup Truck aka REPU repu